Hurtig opsætningsliste

Åbn din dashboard API-styring side og opret din personlige API-nøgle.
Kopier den præcise Bruger-API-basen-URL, der vises der, f.eks. https://v1.tempmailg.com/api.
Send hver anmodning til denne API-vært med Authorization: Bearer YOUR_USER_API_KEY og Accept: application/json.
Følg din månedlige anmodningskvote fra den samme dashboard-side og fra kvote‑headers, når de er tilgængelige i bruger‑API‑svar. Kun succesfulde 2xx‑anmodninger tæller med i kvoten.

Hvis API'en returnerer 404 Sørg for, at du kalder den dedikerede Bruger-API-vært præcis, som vist på din API-Management-side.

API-nøgleadgang

Log ind for at oprette din personlige API-nøgle og se live kvoteoplysninger.

Log Ind Tilmeld dig

Godkendelsesflow

Generer din personlige API-nøgle fra dashboard-API-Management-siden.
Send nøglen som en Bearer-token i hver anmodning.
Brug den dedikerede Bruger-API-basen URL, der vises på din API-Management-side.
Generer nøglen på ny, når du gerne vil ugyldiggøre den gamle og starte med at bruge en ny nøgle med det samme.

Nøgle synlighed Din bruger-API-nøgle forbliver synlig inde på din API-Management-side, indtil du genererer eller tilbagekaldér den.

Krævede headers

Authorization: Bearer YOUR_USER_API_KEY
Accept: application/json

Ratebegrænsning & kvote‑overskrifter

Rate-limit-headers beskriver det angivne anmodningsbudget. Kvote-headers er inkluderet, når kvoteinformation er tilgængelig; minut-grænse-afvisninger beregner ikke din fulde månedlige kvote.

X-RateLimit-Limit: 60
X-RateLimit-Remaining: 45
X-RateLimit-Reset: 1729520000
X-Quota-Limit: 50000
X-Quota-Remaining: 48210
X-Quota-Used: 1790
X-Quota-Reset: 2026-11-01T00:00:00+00:00
X-RateLimit-Scope: account
Retry-After: 42 (when a timed retry is available)

X-RateLimit-Limit — Maksimalt tilladte anmodninger pr. minut (RPM) for din plan.
X-RateLimit-Remaining — RPM-anmodninger tilbage i det aktuelle minutvindue.
X-RateLimit-Reset — Unix-tidsstempel, når det aktuelle minutters hastighedsgrænsevindue nulstilles.
X-Quota-Limit — Den samlede månedlige og købte kreditkapacitet for din konto.
X-Quota-Remaining — Resterende tilgængelige API-anmodninger i den aktuelle måned.
X-Quota-Used — Totalt antal API-anmodninger forbrugt i den aktuelle faktureringsperiode.
X-Quota-Reset — ISO-8601-tidsstempel, når din månedlige kvote nulstilles.
X-RateLimit-Scope — Budgettet beskrevet af overskrifterne: account, ip, status_endpoint eller mailbox.
X-Mailbox-RateLimit-* — Separat postkasseoprettelses-/opdateringsbudget. Succesfulde postkasse‑svar bevarer konto‑RPM i X-RateLimit-*; en postkasse‑kun afvisning bruger postkasse‑omfang og sit eget genforsøgs‑vindue.
Retry-After — Sekunder indtil et tidsbestemt genforsøg er passende. En deaktiveret plan eller udtømt kvote kan i stedet kræve en kontoændring, så denne header er ikke altid til stede.
503 protection_unavailable — API-beskyttelseslagring eller -koordinering er midlertidigt utilgængelig. Prøv igen senere; dette er ikke en betalingsfejl eller en kreditdebitering.

Mailbox Management

Fetch allowed domains, create, update lifetimes, switch, and delete temporary email addresses.

GET https://v1.tempmailg.com/api/domains?type={type}

List Allowed Domains

List available domains for creating temporary emails. Filter by type to see only free, premium, or custom domains supported by your subscription plan.

Parametre 1

Parameter	Placering	Type	Status	Beskrivelse
`type`	query	string	valgfri	Domain tier filter. Allowed values: free, basic, pro, premium, custom, ultimate, all Standard: `free`

Få tilladte domæner

const response = await fetch('https://v1.tempmailg.com/api/domains?type=free', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/domains?type=free', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/domains?type=free');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/domains?type=free' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "requested_type": "free",
        "plan": "pro",
        "plan_name": "Pro Plan",
        "allowed_types": [
            "free",
            "basic",
            "pro",
            "premium",
            "custom",
            "ultimate",
            "all"
        ],
        "domains": [
            {
                "domain": "example.com",
                "type": "Free",
                "custom": false
            }
        ]
    }
}

POST https://v1.tempmailg.com/api/emails

Create Temporary Mailbox

Create a new temporary email address. By default, a random email address is generated. You can customize the email username, domain, or domain type by providing the appropriate parameters in the JSON request body.

Parametre 4

Parameter	Placering	Type	Status	Beskrivelse
`username`	body	string	valgfri	Custom mailbox username prefix (subject to plan custom username permissions). Standard: `Randomly generated`
`domain`	body	string	valgfri	One of the allowed domains returned by GET /domains. Standard: `Default allowed domain`
`lifetime`	body	string	valgfri	Mailbox duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited (also accepts mailbox_lifetime or email_lifetime). Standard: `Plan default lifetime`
`provider`	body	string	valgfri	Mailbox provider: standard, gmail_alias, or outlook_alias. Standard: `standard`

Optional body parameters: username (custom username if allowed by plan), domain (allowed domain, e.g. example.com), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited), provider (standard, gmail_alias, outlook_alias). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create mailbox

const response = await fetch('https://v1.tempmailg.com/api/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2301,
        "email": "customuser@example.com",
        "domain": "example.com",
        "provider": "standard",
        "expire_at": "2026-10-30T06:07:20+00:00",
        "expires_in_seconds": 86400,
        "created_at": "2026-10-29T06:07:20+00:00",
        "email_token": "encrypted-email-token"
    }
}

POST https://v1.tempmailg.com/api/emails/{email}/{username}/{domain}

Update / Switch Mailbox

Update or switch an existing owned mailbox to a new username and allowed domain. This operation applies only to mailboxes owned by the authenticated user.

Parametre 4

Parameter	Placering	Type	Status	Beskrivelse
`email`	path	string	påkrævet	Current full email address of the owned mailbox to switch.
`username`	path	string	påkrævet	New desired username prefix.
`domain`	path	string	påkrævet	New allowed domain name.
`lifetime`	body	string	valgfri	Optional new mailbox lifetime duration. Standard: `Current remaining / plan default`

Brug en eksisterende ejet postkasse-email i {email}. Optional body parameter: lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Opdater ejet postkasse

const response = await fetch('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2302,
        "email": "demo123@example.com",
        "domain": "example.com",
        "expire_at": "2026-10-29T06:17:20+00:00",
        "expires_in_seconds": 600,
        "created_at": "2026-10-29T06:07:20+00:00",
        "email_token": "encrypted-email-token"
    }
}

DELETE https://v1.tempmailg.com/api/emails/{email}

Delete Mailbox

Delete a temporary email address. The email address is immediately marked as expired and soft-deleted, along with all its associated messages.

Parametre 1

Parameter	Placering	Type	Status	Beskrivelse
`email`	path	string	påkrævet	Full email address of the owned mailbox to delete.

Slet ejet postkasse

const response = await fetch('https://v1.tempmailg.com/api/emails/demo123@example.com', {
  method: 'DELETE',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.delete('https://v1.tempmailg.com/api/emails/demo123@example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails/demo123@example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'DELETE',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request DELETE \
  --url 'https://v1.tempmailg.com/api/emails/demo123@example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "message": "Email has been successfully deleted."
}

Gmail & Outlook-aliaser

Generate high-reputation Gmail and Outlook/Hotmail alias mailboxes.

POST https://v1.tempmailg.com/api/gmail-alias/emails

Create Gmail Alias

Create a new Gmail alias temporary mailbox owned by the authenticated user.

Parametre 4

Parameter	Placering	Type	Status	Beskrivelse
`mode`	body	string	valgfri	Generation mode: auto, dot, plus, or plus_word. Standard: `auto`
`username`	body	string	valgfri	Custom alias username prefix. Standard: `Auto-generated`
`domain`	body	string	valgfri	Allowed domain: gmail.com or googlemail.com. Standard: `gmail.com`
`lifetime`	body	string	valgfri	Duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited. Standard: `Plan default lifetime`

Requires the Gmail Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Optional parameters: mode (auto, dot, plus, plus_word), username (custom alias username), domain (e.g. gmail.com, googlemail.com), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create Gmail alias mailbox

const response = await fetch('https://v1.tempmailg.com/api/gmail-alias/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/gmail-alias/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/gmail-alias/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/gmail-alias/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2305,
        "email": "myname.alias123@gmail.com",
        "domain": "gmail.com",
        "provider": "gmail_alias",
        "expire_at": "2026-10-29T07:07:22+00:00",
        "expires_in_seconds": 3600,
        "created_at": "2026-10-29T06:07:22+00:00",
        "email_token": "encrypted-email-token"
    }
}

GET https://v1.tempmailg.com/api/outlook-alias/domains

Outlook Alias Domains

Fetch active Outlook / Hotmail alias domains available for mailbox generation.

Requires the Outlook Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Indicates whether specific domain selection is unlocked on your plan.

Get Outlook alias domains

const response = await fetch('https://v1.tempmailg.com/api/outlook-alias/domains', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/outlook-alias/domains', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/outlook-alias/domains');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/outlook-alias/domains' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "domains": [
            {
                "domain": "outlook.com",
                "type": "Outlook/Hotmail",
                "selectable": true,
                "locked": false,
                "disabled_reason": null
            },
            {
                "domain": "hotmail.com",
                "type": "Outlook/Hotmail",
                "selectable": true,
                "locked": false,
                "disabled_reason": null
            }
        ]
    }
}

POST https://v1.tempmailg.com/api/outlook-alias/emails

Create Outlook Alias

Create a new Outlook / Hotmail alias temporary mailbox owned by the authenticated user.

Parametre 3

Parameter	Placering	Type	Status	Beskrivelse
`domain`	body	string	valgfri	Target Outlook domain, e.g. outlook.com or hotmail.com. Standard: `First available`
`username`	body	string	valgfri	Custom alias prefix if allowed by subscription. Standard: `Auto-generated`
`lifetime`	body	string	valgfri	Duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited. Standard: `Plan default lifetime`

Requires the Outlook Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Optional parameters: domain (e.g. outlook.com, hotmail.com), username (custom alias username), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create Outlook alias mailbox

const response = await fetch('https://v1.tempmailg.com/api/outlook-alias/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/outlook-alias/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/outlook-alias/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/outlook-alias/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2306,
        "email": "fastuser_alias45@outlook.com",
        "domain": "outlook.com",
        "provider": "outlook_alias",
        "expire_at": "2026-10-29T07:07:22+00:00",
        "expires_in_seconds": 3600,
        "created_at": "2026-10-29T06:07:22+00:00",
        "email_token": "encrypted-email-token"
    }
}

Messages & Attachments

Fetch incoming inboxes, read full HTML/text messages, and stream attachments.

GET https://v1.tempmailg.com/api/messages?email={email}

List Mailbox Messages

Retrieve all messages from a temporary email inbox. Returns message details, including message ID, sender, subject, received date, read status, and email preview.

Parametre 1

Parameter	Placering	Type	Status	Beskrivelse
`email`	query	string	påkrævet	Full email address of the owned mailbox to read messages from.

Email-forespørgselsparametren skal tilhøre den autentificerede brugerkonto.

Læs postkassebeskeder

const response = await fetch('https://v1.tempmailg.com/api/messages?email=demo123@example.com', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages?email=demo123@example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages?email=demo123@example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages?email=demo123@example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "mailbox": "randombox@example.com",
    "messages": [
        {
            "is_seen": false,
            "subject": "Welcome to Temp Mail",
            "from": "Example Sender",
            "from_email": "hello@example.org",
            "to": "randombox@example.com",
            "receivedAt": "2026-10-29 06:07:23",
            "id": "ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1",
            "html": true,
            "content": "<p>Hello from the inbox.</p>",
            "attachments": [
                {
                    "name": "file.txt",
                    "extension": "txt",
                    "size": 91,
                    "url": "https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt"
                }
            ]
        }
    ]
}

GET https://v1.tempmailg.com/api/messages/{messageId}

Get Single Message

Retrieve a specific email message by its ID (`hash_id`). Returns the full message content, including the HTML body and attachments.

Parametre 1

Parameter	Placering	Type	Status	Beskrivelse
`messageId`	path	string	påkrævet	Unique message ID returned in the message list.

Læs en besked

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "is_seen": true,
        "subject": "Welcome to Temp Mail",
        "from": "Example Sender",
        "from_email": "hello@example.org",
        "to": "randombox@example.com",
        "receivedAt": "2026-10-29 06:07:23",
        "id": "ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1",
        "html": true,
        "content": "<p>Hello from the inbox.</p>",
        "attachments": [
            {
                "name": "file.txt",
                "extension": "txt",
                "size": 91,
                "url": "https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt"
            }
        ]
    }
}

DELETE https://v1.tempmailg.com/api/messages/{messageId}

Slet besked

Slet en enkelt ejet besked.

Parametre 1

Parameter	Placering	Type	Status	Beskrivelse
`messageId`	path	string	påkrævet	Unique message ID string to permanently delete.

Slet en besked

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', {
  method: 'DELETE',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.delete('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'DELETE',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request DELETE \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "message": "Message was deleted successfully."
}

GET https://v1.tempmailg.com/api/messages/{messageId}/attachments/{filename}

Download Attachment

Hent en vedhæftning fra en ejendom besked.

Parametre 2

Parameter	Placering	Type	Status	Beskrivelse
`messageId`	path	string	påkrævet	ID of the message containing the file.
`filename`	path	string	påkrævet	Filename and extension of the attachment to download.

This endpoint downloads the file directly. Downloads are subject to the maximum attachment size (MB) limit configured for your plan; oversized files return HTTP 403.

Hent en vedhæftning

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const blob = await response.blob();
const downloadUrl = window.URL.createObjectURL(blob);
const link = document.createElement('a');
link.href = downloadUrl;
link.download = 'file.txt';
document.body.appendChild(link);
link.click();
link.remove();
window.URL.revokeObjectURL(downloadUrl);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt', headers=headers, stream=True, timeout=30)
response.raise_for_status()

with open('file.txt', 'wb') as handle:
    for chunk in response.iter_content(chunk_size=8192):
        if chunk:
            handle.write(chunk)

<?php

$fileHandle = fopen('file.txt', 'w');
$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_FILE => $fileHandle,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

if (curl_exec($ch) === false) {
    fclose($fileHandle);
    throw new RuntimeException(curl_error($ch));
}

curl_close($ch);
fclose($fileHandle);

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY' \
  --output file.txt

Downloadadfærd Dette endpoint returnerer den anmodede fil direkte i stedet for en JSON-brødtekst.

Rate Limits & Quotas

Monitor real-time request budgets, rate limits, and account quotas without consuming credits.

GET https://v1.tempmailg.com/api/rate-limit

Rate Limit & Quota

Check your current rate limit and quota status without consuming any API usage. This endpoint is quota-free and does not deduct monthly API credits (abuse protection limit: 60 requests/min).

X-RateLimit-* describes the indicated request budget; X-Quota-* describes monthly and purchased capacity when available. X-Mailbox-RateLimit-* reports the separate mailbox creation/update budget. A mailbox-only rejection uses mailbox scope and its own retry window. Minute-limit rejections may omit quota information. Retry-After is included only for a timed retry; disabled access may require an account change. In this successful status response, data.limit, data.remaining and data.reset describe the account minute budget, not spendable credits. The data.quota object describes monthly allowance, credit balances and usage. The existing data.monthly_limit, data.monthly_remaining and data.purchased_credits fields remain aliases of the corresponding quota fields. A successful status check does not authorize another API operation. Operations still require enabled access, available quota and admission through all applicable limits. The quota snapshot does not promise capacity already reserved by an in-progress request.

Check rate limit status

const response = await fetch('https://v1.tempmailg.com/api/rate-limit', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/rate-limit', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/rate-limit');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/rate-limit' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": "success",
    "data": {
        "limit": 60,
        "remaining": 45,
        "reset": 32,
        "plan": "premium",
        "monthly_limit": 50000,
        "monthly_remaining": 48210,
        "purchased_credits": 5000,
        "quota": {
            "enabled": true,
            "user_api_status": true,
            "plan_name": "Premium Plan",
            "period": "2026-10",
            "base_limit": 50000,
            "extra_requests": 0,
            "monthly_limit": 50000,
            "monthly_remaining": 48210,
            "used": 1790,
            "purchased_credits": 5000,
            "bonus_credits": 1000,
            "direct_purchased_credits": 4000,
            "remaining": 53210,
            "unlimited": false,
            "usage_percent": 3,
            "reset_at": "2026-11-01T00:00:00+00:00"
        }
    }
}

Svarfelter

Felt	Type	Beskrivelse
`data.limit`	integer\|string	Account requests-per-minute limit. The string unlimited denotes an unlimited minute budget; this is independent of monthly quota.
`data.remaining`	integer\|string	Remaining account minute-budget slots, or the string unlimited. A positive value does not mean that API credits remain.
`data.reset`	integer	Seconds for the account minute window, not the monthly quota reset. Disabled or unlimited minute budgets can retain a nominal 60-second value; this does not promise access after waiting.
`data.plan`	string	Current plan tag. The readable plan name is provided separately in data.quota.plan_name.
`data.quota.enabled`	boolean	Whether global and plan/credit API access is enabled. This does not indicate remaining capacity or replace the user API switch.
`data.quota.user_api_status`	boolean	Whether the user has enabled their User API switch. Operations require this switch as well as enabled access and available capacity.
`data.quota.plan_name`	string	Readable name of the current plan.
`data.quota.period`	string	Calendar-month usage period in YYYY-MM format, using the application timezone; not necessarily the subscription billing period.
`data.quota.base_limit`	integer	Base monthly plan allowance. A value of -1 means unlimited.
`data.quota.extra_requests`	integer	Additional monthly allowance granted for the current usage period; separate from purchased credits.
`data.quota.monthly_limit`	integer	Base allowance plus current-period extra requests. A value of -1 means unlimited. Purchased credits are not included.
`data.quota.monthly_remaining`	integer\|null	Remaining finite monthly allowance, or null when monthly quota is unlimited. Null must not be interpreted as zero.
`data.quota.used`	integer	Successful, counted API operations in the current usage period, including operations using credits. Status checks do not increase this value.
`data.quota.purchased_credits`	integer	Current credit balance, including active plan bonus credits. Bonus credits must not be added to this balance a second time.
`data.quota.bonus_credits`	integer	Active plan-bonus portion of the credit balance; a breakdown of purchased_credits, not additional capacity.
`data.quota.direct_purchased_credits`	integer	Credit balance excluding the active plan-bonus portion. This value plus bonus_credits equals purchased_credits.
`data.quota.remaining`	integer\|null	Monthly remaining allowance plus the current credit balance, without double-counting bonuses. Null means unlimited monthly quota. Individual feature permissions and other request limits still apply.
`data.quota.unlimited`	boolean	Whether monthly quota is unlimited. This does not make the account minute budget or other feature limits unlimited.
`data.quota.usage_percent`	integer	Dashboard-compatible rounded percentage from 0 to 100: used divided by used plus remaining, multiplied by 100. It includes available credit capacity, so recharging can lower the percentage. It is 0 for unlimited quota or a zero-sized pool; it is not the minute rate-limit percentage or an access decision.
`data.quota.reset_at`	string	ISO-8601 timestamp with timezone offset for the next calendar-month quota reset. This is not the subscription expiry date, and the monthly reset does not refill purchased credits.

Postkasse-webhooks (Echtzeit-Push)

I stedet for gentagne polling af REST-API'en (GET /messages) for at kontrollere efter indgående mail, konfigurer Webhooks til at push nye meddelelser til din server eller automatiseringsworkflow i realtid.

Log ind for at oprette Webhooks

Protokol HTTPS POST

Indholdets format JSON

Sikkerhed HMAC-SHA256

Tilgængelighed Betalte planer

Støttede Webhook-hændelser

Hvert webhook kan abonnere på en eller flere hændelsestypers. Din endpoint modtager en hændelsesmeddelelse hver gang en af disse udløsere aktiveres.

email.received Ny email modtaget

Dispatched in real time whenever a new message reaches the selected mailbox.

mailbox.expired Mailbox Expired

Dispatched when the temporary mailbox expires and webhook processing is paused.

mailbox.reactivated Mailbox Reactivated

Dispatched when an expired mailbox becomes active again under plan rules.

mailbox.deleted Mailbox Deleted

Dispatched right before the webhook and its mailbox are deleted.

Anmodningshoved og HMAC-signaturverifikation

Hvert webhook-levering indeholder særlige sikkerhedshoveder. Brug X-TempMailg-Signature-hovedet til at verifcere, at indgående anmodninger er blevet afsendt ægte af TempMailg og ikke er blevet ændret.

Overskrift	Eksempelværdi	Beskrivelse
`User-Agent`	TempMailg-Webhooks/1.0	Standard identifier for the webhook delivery worker.
`X-TempMailg-Event`	email.received	The type of event that triggered this delivery.
`X-TempMailg-Event-Id`	e7b1a2c3-4d5e-6f7a-8b9c-0d1e2f3a4b5c	Unique UUID assigned to this delivery attempt.
`X-TempMailg-Timestamp`	1725192000	Unix epoch timestamp indicating when the request was initiated.
`X-TempMailg-Signature`	sha256=d7a8fbb307d7809469ca933b02d82941...	HMAC-SHA256 signature calculated from {timestamp}.{raw_body} using your secret.
`X-TempMailg-Test`	false	True when dispatched by the "Send Test Ping" feature in your dashboard.

Hvordan underskriftsverifikation fungerer

Underskriften beregnes ved hjælp af HMAC med SHA256 over følgende streng: hash_hmac('sha256', "${X-TempMailg-Timestamp}.${raw_request_body}", your_webhook_secret)

Brug altid dine endpoint-raw request body bytes til at verifcere underskrifter før du parserer JSON.

Eksempel på Begivenhedsbetydning (email.received)

Levert som application/json i HTTP POST-krop

{
    "id": "e7b1a2c3-4d5e-6f7a-8b9c-0d1e2f3a4b5c",
    "version": "1.0",
    "event": "email.received",
    "occurred_at": "2026-10-29T06:07:26+00:00",
    "test": false,
    "mailbox": {
        "id": 1024,
        "email": "developer@v1.tempmailg.com"
    },
    "data": {
        "message_id": "7a8b9c0d1e2f",
        "subject": "Your Verification Code: 948201",
        "from": "auth@service.com",
        "to": "developer@v1.tempmailg.com",
        "date": "2026-10-29T06:07:26+00:00",
        "attachments_count": 0,
        "text_preview": "Hello, your one-time verification code is 948201. It will expire in 10 minutes.",
        "email_url": "https://tempmailg.com/mailbox/1024?message=7a8b9c0d1e2f",
        "inbox_url": "https://tempmailg.com/mailbox/1024"
    }
}

Eksempler på modtagerimplementering

Vælg dit sprog for at se, hvordan du modtager webhooks og verificerer HMAC‑signaturer sikkert.

const express = require('express');
const crypto = require('crypto');

const app = express();
const WEBHOOK_SECRET = 'your_webhook_signing_secret';

// Capture raw body buffer for HMAC-SHA256 signature verification
app.use(express.json({
  verify: (req, res, buf) => {
    req.rawBody = buf.toString('utf8');
  }
}));

app.post('/webhook', (req, res) => {
  const timestamp = req.headers['x-tempmailg-timestamp'];
  const signatureHeader = req.headers['x-tempmailg-signature'] || '';

  // Calculate HMAC-SHA256 signature
  const expectedSignature = 'sha256=' + crypto
    .createHmac('sha256', WEBHOOK_SECRET)
    .update(`${timestamp}.${req.rawBody}`)
    .digest('hex');

  // Verify signature
  if (signatureHeader !== expectedSignature) {
    return res.status(401).json({ error: 'Invalid webhook signature' });
  }

  const { event, mailbox, data } = req.body;
  console.log(`[Event: ${event}] Mailbox: ${mailbox.email}`);

  if (event === 'email.received') {
    console.log(`From: ${data.from}`);
    console.log(`Subject: ${data.subject}`);
    console.log(`Preview: ${data.text_preview}`);
  }

  // Acknowledge receipt with HTTP 200
  res.status(200).json({ received: true });
});

app.listen(3000, () => console.log('Webhook receiver running on port 3000'));

from flask import Flask, request, jsonify
import hmac
import hashlib

app = Flask(__name__)
WEBHOOK_SECRET = b"your_webhook_signing_secret"

@app.route("/webhook", methods=["POST"])
def handle_webhook():
    timestamp = request.headers.get("X-TempMailg-Timestamp", "")
    signature_header = request.headers.get("X-TempMailg-Signature", "")

    # Calculate expected HMAC-SHA256 signature
    raw_body = request.get_data()
    signed_payload = f"{timestamp}.".encode("utf-8") + raw_body
    expected_signature = "sha256=" + hmac.new(
        WEBHOOK_SECRET, signed_payload, hashlib.sha256
    ).hexdigest()

    # Verify signature securely
    if not hmac.compare_digest(signature_header, expected_signature):
        return jsonify({"error": "Invalid signature"}), 401

    payload = request.get_json()
    event = payload.get("event")
    mailbox = payload.get("mailbox", {}).get("email")
    data = payload.get("data", {})

    print(f"[{event}] Mailbox: {mailbox}")
    if event == "email.received":
        print(f"From: {data.get('from')}")
        print(f"Subject: {data.get('subject')}")
        print(f"Preview: {data.get('text_preview')}")

    # Return 200 OK to acknowledge receipt
    return jsonify({"received": True}), 200

if __name__ == "__main__":
    app.run(port=5000)

<?php

$secret = 'your_webhook_signing_secret';
$rawBody = file_get_contents('php://input');
$timestamp = $_SERVER['HTTP_X_TEMPMAILG_TIMESTAMP'] ?? '';
$receivedSignature = $_SERVER['HTTP_X_TEMPMAILG_SIGNATURE'] ?? '';

// Calculate HMAC-SHA256 signature
$expectedSignature = 'sha256=' . hash_hmac('sha256', $timestamp . '.' . $rawBody, $secret);

// Verify signature
if (!hash_equals($expectedSignature, $receivedSignature)) {
    http_response_code(401);
    echo json_encode(['error' => 'Invalid signature']);
    exit;
}

$payload = json_decode($rawBody, true);
$event = $payload['event'] ?? '';
$mailbox = $payload['mailbox']['email'] ?? '';
$data = $payload['data'] ?? [];

if ($event === 'email.received') {
    $sender = $data['from'] ?? '';
    $subject = $data['subject'] ?? '';
    $preview = $data['text_preview'] ?? '';
    // Process new incoming email...
}

// Acknowledge receipt
http_response_code(200);
echo json_encode(['received' => true]);

Understøttede platforme og automatiseringsintegrationer

TempMailg Webhooks fungerer ud af boksen med standard HTTPS-endpoints og førende no-code/automatiseringsplatforme:

Custom HTTP POST / JSON Discord Slack Mattermost Microsoft Teams Google Chat Zapier Make.com Pipedream n8n much more

Almindelige fejl og fejlfinding

Disse er de mest almindelige svarkoder, du kan se, mens du integrerer bruger-API'en.

Ren-tekst svar i stedet for JSON Et svar som "Cannot GET /" er ikke et vellykket User API-svar, selvom status er 200. Tjek den komplette anmodnings-URL og behold API-stien, der vises i Base URL.

401 Unauthorized

Ugyldig eller manglende Bearer-token.

403 Forbidden

Bruger-API-adgang er deaktiveret for den nuværende brugerplan.

404 Not Found

Ressourcen blev ikke fundet på den tilladte vært eller tilhører ikke brugeren.

410 Gone / Expired

Postkasse er udløbet eller inaktiv.

422 Validation Error

Validering fejlede eller den anmodede postkasse/domæne er ikke tilladt.

429 Rate Limited / Quota Exhausted

A request limit, disabled plan, exhausted quota, or cooldown prevented the operation. Check the reason and available budget headers. Retry-After is optional.

503 API Protection Temporarily Unavailable

Protection storage or coordination could not be verified. Retry after the indicated delay. This response is not a failed payment.

Hurtig tjekliste

401 Unauthorized - Bearer-token mangler, er forkert, tilbagekaldt eller kopieret forkert.
403 Forbidden - Den nuværende plan har ikke bruger-API-adgang lige nu.
404 Not Found - Ressource ikke fundet eller ugyldig parameter
410 Gone / Expired - Postkassen er udløbet eller er ikke længere aktiv.
429 Rate Limited - Månedlig kreditgrænse nået — køb kredit eller vent på genindstilling

Anbefalet næste skridt

Hvis du er logget ind, åbn API Management først og bekræft din nøgle, kvote, planadgangsstatus og den præcise bruger-API-basen URL, før du fejlfinder din eksterne app.

Log ind for at konfigurere API-nøgle