Checklist di setup rapido

Apri la pagina API Management del tuo dashboard e crea la tua chiave API personale.
Copia l'URL di base dell'API utente esatto mostrato lì, ad esempio https://v1.tempmailg.com/api.
Invia ogni richiesta a quell'host API con Authorization: Bearer YOUR_USER_API_KEY e Accept: application/json.
Monitora la tua quota mensile di richieste dalla stessa pagina del cruscotto e dalle intestazioni della quota quando disponibili nelle risposte API dell'utente. Solo le richieste 2xx riuscite contano ai fini della quota.

Se l'API restituisce 404 Assicurarsi di chiamare l'host API dedicato dell'utente esattamente come mostrato nella pagina di gestione dell'API.

Accesso alla chiave API

Accedi per creare la tua chiave API personale e visualizzare i dettagli della quota in tempo reale.

Accedi Iscriviti

Flusso di autenticazione

Generare la chiave API personale dalla pagina di gestione dell'API del cruscotto.
Inviare la chiave come token Bearer in ogni richiesta.
Utilizzare l'URL di base dell'API dell'utente dedicato mostrato nella pagina di gestione dell'API.
Rigenerare la chiave ogni volta che si desidera annullare la vecchia e iniziare a utilizzare una nuova chiave immediatamente.

Visibilità della chiave La chiave API dell'utente rimane visibile all'interno della pagina di gestione dell'API fino a quando non viene rigenerata o revocata.

Header obbligatori

Authorization: Bearer YOUR_USER_API_KEY
Accept: application/json

Intestazioni di Limite di Velocità e Quota

Le intestazioni di limitazione della velocità descrivono il budget di richieste indicato. Le intestazioni di quota sono incluse quando le informazioni sulla quota sono disponibili; i rifiuti per limite al minuto non calcolano la tua quota mensile completa.

X-RateLimit-Limit: 60
X-RateLimit-Remaining: 45
X-RateLimit-Reset: 1729520000
X-Quota-Limit: 50000
X-Quota-Remaining: 48210
X-Quota-Used: 1790
X-Quota-Reset: 2026-11-01T00:00:00+00:00
X-RateLimit-Scope: account
Retry-After: 42 (when a timed retry is available)

X-RateLimit-Limit — Richieste massime consentite al minuto (RPM) per il tuo piano.
X-RateLimit-Remaining — Richieste RPM rimanenti nella finestra corrente di un minuto.
X-RateLimit-Reset — Timestamp Unix quando la finestra di limitazione del tasso per il minuto corrente si resetta.
X-Quota-Limit — Capacità totale mensile e di credito acquistato per il tuo account.
X-Quota-Remaining — Richieste API disponibili rimanenti nel mese corrente.
X-Quota-Used — Totale richieste API consumate durante il periodo di fatturazione corrente.
X-Quota-Reset — Timestamp ISO-8601 quando la tua quota mensile si resetta.
X-RateLimit-Scope — Il budget descritto dalle intestazioni: account, ip, status_endpoint o mailbox.
X-Mailbox-RateLimit-* — Budget separato per la creazione/aggiornamento della casella di posta. Le risposte di casella di posta riuscite mantengono l'RPM dell'account in X-RateLimit-*; un rifiuto solo per la casella di posta utilizza l'ambito della casella e la sua finestra di ritentativo.
Retry-After — Secondi prima che un nuovo tentativo temporizzato sia appropriato. Un piano disabilitato o una quota esaurita potrebbero richiedere invece un cambio di account, quindi questa intestazione non è sempre presente.
503 protection_unavailable — L'archiviazione o il coordinamento della protezione API non è temporaneamente disponibile. Riprova più tardi; questo non è un fallimento di pagamento o un addebito di credito.

Mailbox Management

Fetch allowed domains, create, update lifetimes, switch, and delete temporary email addresses.

GET https://v1.tempmailg.com/api/domains?type={type}

List Allowed Domains

List available domains for creating temporary emails. Filter by type to see only free, premium, or custom domains supported by your subscription plan.

Parametri 1

Parametro	Posizione	Tipo	Stato	Descrizione
`type`	query	string	opzionale	Domain tier filter. Allowed values: free, basic, pro, premium, custom, ultimate, all Predefinito: `free`

Ottieni domini consentiti

const response = await fetch('https://v1.tempmailg.com/api/domains?type=free', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/domains?type=free', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/domains?type=free');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/domains?type=free' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "requested_type": "free",
        "plan": "pro",
        "plan_name": "Pro Plan",
        "allowed_types": [
            "free",
            "basic",
            "pro",
            "premium",
            "custom",
            "ultimate",
            "all"
        ],
        "domains": [
            {
                "domain": "example.com",
                "type": "Free",
                "custom": false
            }
        ]
    }
}

POST https://v1.tempmailg.com/api/emails

Create Temporary Mailbox

Create a new temporary email address. By default, a random email address is generated. You can customize the email username, domain, or domain type by providing the appropriate parameters in the JSON request body.

Parametri 4

Parametro	Posizione	Tipo	Stato	Descrizione
`username`	body	string	opzionale	Custom mailbox username prefix (subject to plan custom username permissions). Predefinito: `Randomly generated`
`domain`	body	string	opzionale	One of the allowed domains returned by GET /domains. Predefinito: `Default allowed domain`
`lifetime`	body	string	opzionale	Mailbox duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited (also accepts mailbox_lifetime or email_lifetime). Predefinito: `Plan default lifetime`
`provider`	body	string	opzionale	Mailbox provider: standard, gmail_alias, or outlook_alias. Predefinito: `standard`

Optional body parameters: username (custom username if allowed by plan), domain (allowed domain, e.g. example.com), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited), provider (standard, gmail_alias, outlook_alias). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create mailbox

const response = await fetch('https://v1.tempmailg.com/api/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2301,
        "email": "customuser@example.com",
        "domain": "example.com",
        "provider": "standard",
        "expire_at": "2026-10-30T06:07:12+00:00",
        "expires_in_seconds": 86400,
        "created_at": "2026-10-29T06:07:12+00:00",
        "email_token": "encrypted-email-token"
    }
}

POST https://v1.tempmailg.com/api/emails/{email}/{username}/{domain}

Update / Switch Mailbox

Update or switch an existing owned mailbox to a new username and allowed domain. This operation applies only to mailboxes owned by the authenticated user.

Parametri 4

Parametro	Posizione	Tipo	Stato	Descrizione
`email`	path	string	obbligatorio	Current full email address of the owned mailbox to switch.
`username`	path	string	obbligatorio	New desired username prefix.
`domain`	path	string	obbligatorio	New allowed domain name.
`lifetime`	body	string	opzionale	Optional new mailbox lifetime duration. Predefinito: `Current remaining / plan default`

Utilizzare un indirizzo email di casella di posta posseduta esistente in {email}. Optional body parameter: lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Aggiornare casella di posta posseduta

const response = await fetch('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2302,
        "email": "demo123@example.com",
        "domain": "example.com",
        "expire_at": "2026-10-29T06:17:12+00:00",
        "expires_in_seconds": 600,
        "created_at": "2026-10-29T06:07:12+00:00",
        "email_token": "encrypted-email-token"
    }
}

DELETE https://v1.tempmailg.com/api/emails/{email}

Delete Mailbox

Delete a temporary email address. The email address is immediately marked as expired and soft-deleted, along with all its associated messages.

Parametri 1

Parametro	Posizione	Tipo	Stato	Descrizione
`email`	path	string	obbligatorio	Full email address of the owned mailbox to delete.

Eliminare casella di posta posseduta

const response = await fetch('https://v1.tempmailg.com/api/emails/demo123@example.com', {
  method: 'DELETE',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.delete('https://v1.tempmailg.com/api/emails/demo123@example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails/demo123@example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'DELETE',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request DELETE \
  --url 'https://v1.tempmailg.com/api/emails/demo123@example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "message": "Email has been successfully deleted."
}

Alias Gmail e Outlook

Generate high-reputation Gmail and Outlook/Hotmail alias mailboxes.

POST https://v1.tempmailg.com/api/gmail-alias/emails

Create Gmail Alias

Create a new Gmail alias temporary mailbox owned by the authenticated user.

Parametri 4

Parametro	Posizione	Tipo	Stato	Descrizione
`mode`	body	string	opzionale	Generation mode: auto, dot, plus, or plus_word. Predefinito: `auto`
`username`	body	string	opzionale	Custom alias username prefix. Predefinito: `Auto-generated`
`domain`	body	string	opzionale	Allowed domain: gmail.com or googlemail.com. Predefinito: `gmail.com`
`lifetime`	body	string	opzionale	Duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited. Predefinito: `Plan default lifetime`

Requires the Gmail Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Optional parameters: mode (auto, dot, plus, plus_word), username (custom alias username), domain (e.g. gmail.com, googlemail.com), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create Gmail alias mailbox

const response = await fetch('https://v1.tempmailg.com/api/gmail-alias/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/gmail-alias/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/gmail-alias/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/gmail-alias/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2305,
        "email": "myname.alias123@gmail.com",
        "domain": "gmail.com",
        "provider": "gmail_alias",
        "expire_at": "2026-10-29T07:07:13+00:00",
        "expires_in_seconds": 3600,
        "created_at": "2026-10-29T06:07:13+00:00",
        "email_token": "encrypted-email-token"
    }
}

GET https://v1.tempmailg.com/api/outlook-alias/domains

Outlook Alias Domains

Fetch active Outlook / Hotmail alias domains available for mailbox generation.

Requires the Outlook Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Indicates whether specific domain selection is unlocked on your plan.

Get Outlook alias domains

const response = await fetch('https://v1.tempmailg.com/api/outlook-alias/domains', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/outlook-alias/domains', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/outlook-alias/domains');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/outlook-alias/domains' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "domains": [
            {
                "domain": "outlook.com",
                "type": "Outlook/Hotmail",
                "selectable": true,
                "locked": false,
                "disabled_reason": null
            },
            {
                "domain": "hotmail.com",
                "type": "Outlook/Hotmail",
                "selectable": true,
                "locked": false,
                "disabled_reason": null
            }
        ]
    }
}

POST https://v1.tempmailg.com/api/outlook-alias/emails

Create Outlook Alias

Create a new Outlook / Hotmail alias temporary mailbox owned by the authenticated user.

Parametri 3

Parametro	Posizione	Tipo	Stato	Descrizione
`domain`	body	string	opzionale	Target Outlook domain, e.g. outlook.com or hotmail.com. Predefinito: `First available`
`username`	body	string	opzionale	Custom alias prefix if allowed by subscription. Predefinito: `Auto-generated`
`lifetime`	body	string	opzionale	Duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited. Predefinito: `Plan default lifetime`

Requires the Outlook Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Optional parameters: domain (e.g. outlook.com, hotmail.com), username (custom alias username), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create Outlook alias mailbox

const response = await fetch('https://v1.tempmailg.com/api/outlook-alias/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/outlook-alias/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/outlook-alias/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/outlook-alias/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2306,
        "email": "fastuser_alias45@outlook.com",
        "domain": "outlook.com",
        "provider": "outlook_alias",
        "expire_at": "2026-10-29T07:07:14+00:00",
        "expires_in_seconds": 3600,
        "created_at": "2026-10-29T06:07:14+00:00",
        "email_token": "encrypted-email-token"
    }
}

Messages & Attachments

Fetch incoming inboxes, read full HTML/text messages, and stream attachments.

GET https://v1.tempmailg.com/api/messages?email={email}

List Mailbox Messages

Retrieve all messages from a temporary email inbox. Returns message details, including message ID, sender, subject, received date, read status, and email preview.

Parametri 1

Parametro	Posizione	Tipo	Stato	Descrizione
`email`	query	string	obbligatorio	Full email address of the owned mailbox to read messages from.

Il parametro di query dell'email deve appartenere all'account dell'utente autenticato.

Leggere i messaggi della casella di posta

const response = await fetch('https://v1.tempmailg.com/api/messages?email=demo123@example.com', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages?email=demo123@example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages?email=demo123@example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages?email=demo123@example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "mailbox": "randombox@example.com",
    "messages": [
        {
            "is_seen": false,
            "subject": "Welcome to Temp Mail",
            "from": "Example Sender",
            "from_email": "hello@example.org",
            "to": "randombox@example.com",
            "receivedAt": "2026-10-29 06:07:14",
            "id": "ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1",
            "html": true,
            "content": "<p>Hello from the inbox.</p>",
            "attachments": [
                {
                    "name": "file.txt",
                    "extension": "txt",
                    "size": 91,
                    "url": "https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt"
                }
            ]
        }
    ]
}

GET https://v1.tempmailg.com/api/messages/{messageId}

Get Single Message

Retrieve a specific email message by its ID (`hash_id`). Returns the full message content, including the HTML body and attachments.

Parametri 1

Parametro	Posizione	Tipo	Stato	Descrizione
`messageId`	path	string	obbligatorio	Unique message ID returned in the message list.

Leggere un messaggio

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "data": {
        "is_seen": true,
        "subject": "Welcome to Temp Mail",
        "from": "Example Sender",
        "from_email": "hello@example.org",
        "to": "randombox@example.com",
        "receivedAt": "2026-10-29 06:07:14",
        "id": "ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1",
        "html": true,
        "content": "<p>Hello from the inbox.</p>",
        "attachments": [
            {
                "name": "file.txt",
                "extension": "txt",
                "size": 91,
                "url": "https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt"
            }
        ]
    }
}

DELETE https://v1.tempmailg.com/api/messages/{messageId}

Elimina messaggio

Eliminare un singolo messaggio posseduto.

Parametri 1

Parametro	Posizione	Tipo	Stato	Descrizione
`messageId`	path	string	obbligatorio	Unique message ID string to permanently delete.

Elimina un messaggio

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', {
  method: 'DELETE',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.delete('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'DELETE',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request DELETE \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": true,
    "message": "Message was deleted successfully."
}

GET https://v1.tempmailg.com/api/messages/{messageId}/attachments/{filename}

Download Attachment

Scarica un allegato da un messaggio di proprietà.

Parametri 2

Parametro	Posizione	Tipo	Stato	Descrizione
`messageId`	path	string	obbligatorio	ID of the message containing the file.
`filename`	path	string	obbligatorio	Filename and extension of the attachment to download.

This endpoint downloads the file directly. Downloads are subject to the maximum attachment size (MB) limit configured for your plan; oversized files return HTTP 403.

Scarica un allegato

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const blob = await response.blob();
const downloadUrl = window.URL.createObjectURL(blob);
const link = document.createElement('a');
link.href = downloadUrl;
link.download = 'file.txt';
document.body.appendChild(link);
link.click();
link.remove();
window.URL.revokeObjectURL(downloadUrl);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt', headers=headers, stream=True, timeout=30)
response.raise_for_status()

with open('file.txt', 'wb') as handle:
    for chunk in response.iter_content(chunk_size=8192):
        if chunk:
            handle.write(chunk)

<?php

$fileHandle = fopen('file.txt', 'w');
$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_FILE => $fileHandle,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

if (curl_exec($ch) === false) {
    fclose($fileHandle);
    throw new RuntimeException(curl_error($ch));
}

curl_close($ch);
fclose($fileHandle);

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY' \
  --output file.txt

Comportamento di download Questo endpoint restituisce il file richiesto direttamente invece di un corpo JSON.

Rate Limits & Quotas

Monitor real-time request budgets, rate limits, and account quotas without consuming credits.

GET https://v1.tempmailg.com/api/rate-limit

Rate Limit & Quota

Check your current rate limit and quota status without consuming any API usage. This endpoint is quota-free and does not deduct monthly API credits (abuse protection limit: 60 requests/min).

X-RateLimit-* describes the indicated request budget; X-Quota-* describes monthly and purchased capacity when available. X-Mailbox-RateLimit-* reports the separate mailbox creation/update budget. A mailbox-only rejection uses mailbox scope and its own retry window. Minute-limit rejections may omit quota information. Retry-After is included only for a timed retry; disabled access may require an account change. In this successful status response, data.limit, data.remaining and data.reset describe the account minute budget, not spendable credits. The data.quota object describes monthly allowance, credit balances and usage. The existing data.monthly_limit, data.monthly_remaining and data.purchased_credits fields remain aliases of the corresponding quota fields. A successful status check does not authorize another API operation. Operations still require enabled access, available quota and admission through all applicable limits. The quota snapshot does not promise capacity already reserved by an in-progress request.

Check rate limit status

const response = await fetch('https://v1.tempmailg.com/api/rate-limit', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/rate-limit', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/rate-limit');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/rate-limit' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Esempio di risposta

200 OK • JSON

{
    "status": "success",
    "data": {
        "limit": 60,
        "remaining": 45,
        "reset": 32,
        "plan": "premium",
        "monthly_limit": 50000,
        "monthly_remaining": 48210,
        "purchased_credits": 5000,
        "quota": {
            "enabled": true,
            "user_api_status": true,
            "plan_name": "Premium Plan",
            "period": "2026-10",
            "base_limit": 50000,
            "extra_requests": 0,
            "monthly_limit": 50000,
            "monthly_remaining": 48210,
            "used": 1790,
            "purchased_credits": 5000,
            "bonus_credits": 1000,
            "direct_purchased_credits": 4000,
            "remaining": 53210,
            "unlimited": false,
            "usage_percent": 3,
            "reset_at": "2026-11-01T00:00:00+00:00"
        }
    }
}

Campi di risposta

Campo	Tipo	Descrizione
`data.limit`	integer\|string	Account requests-per-minute limit. The string unlimited denotes an unlimited minute budget; this is independent of monthly quota.
`data.remaining`	integer\|string	Remaining account minute-budget slots, or the string unlimited. A positive value does not mean that API credits remain.
`data.reset`	integer	Seconds for the account minute window, not the monthly quota reset. Disabled or unlimited minute budgets can retain a nominal 60-second value; this does not promise access after waiting.
`data.plan`	string	Current plan tag. The readable plan name is provided separately in data.quota.plan_name.
`data.quota.enabled`	boolean	Whether global and plan/credit API access is enabled. This does not indicate remaining capacity or replace the user API switch.
`data.quota.user_api_status`	boolean	Whether the user has enabled their User API switch. Operations require this switch as well as enabled access and available capacity.
`data.quota.plan_name`	string	Readable name of the current plan.
`data.quota.period`	string	Calendar-month usage period in YYYY-MM format, using the application timezone; not necessarily the subscription billing period.
`data.quota.base_limit`	integer	Base monthly plan allowance. A value of -1 means unlimited.
`data.quota.extra_requests`	integer	Additional monthly allowance granted for the current usage period; separate from purchased credits.
`data.quota.monthly_limit`	integer	Base allowance plus current-period extra requests. A value of -1 means unlimited. Purchased credits are not included.
`data.quota.monthly_remaining`	integer\|null	Remaining finite monthly allowance, or null when monthly quota is unlimited. Null must not be interpreted as zero.
`data.quota.used`	integer	Successful, counted API operations in the current usage period, including operations using credits. Status checks do not increase this value.
`data.quota.purchased_credits`	integer	Current credit balance, including active plan bonus credits. Bonus credits must not be added to this balance a second time.
`data.quota.bonus_credits`	integer	Active plan-bonus portion of the credit balance; a breakdown of purchased_credits, not additional capacity.
`data.quota.direct_purchased_credits`	integer	Credit balance excluding the active plan-bonus portion. This value plus bonus_credits equals purchased_credits.
`data.quota.remaining`	integer\|null	Monthly remaining allowance plus the current credit balance, without double-counting bonuses. Null means unlimited monthly quota. Individual feature permissions and other request limits still apply.
`data.quota.unlimited`	boolean	Whether monthly quota is unlimited. This does not make the account minute budget or other feature limits unlimited.
`data.quota.usage_percent`	integer	Dashboard-compatible rounded percentage from 0 to 100: used divided by used plus remaining, multiplied by 100. It includes available credit capacity, so recharging can lower the percentage. It is 0 for unlimited quota or a zero-sized pool; it is not the minute rate-limit percentage or an access decision.
`data.quota.reset_at`	string	ISO-8601 timestamp with timezone offset for the next calendar-month quota reset. This is not the subscription expiry date, and the monthly reset does not refill purchased credits.

Webhook per Mailbox (Invio in Tempo Reale)

Invece di interrogare ripetutamente l'API REST (GET /messages) per controllare se ci sono messaggi in arrivo, configura le Webhook per inviare nuovi messaggi al tuo server o al tuo flusso di lavoro di automazione in tempo reale.

Accedi per configurare Webhooks

Protocollo HTTPS POST

Formato Payload JSON

Sicurezza HMAC-SHA256

Disponibilità Piani a pagamento

Eventi Webhook supportati

Ogni webhook può iscriversi a uno o più tipi di eventi. Il tuo endpoint riceve una notifica di evento ogni volta che uno di questi trigger viene attivato.

email.received Nuova email ricevuta

Dispatched in real time whenever a new message reaches the selected mailbox.

mailbox.expired Mailbox Expired

Dispatched when the temporary mailbox expires and webhook processing is paused.

mailbox.reactivated Mailbox Reactivated

Dispatched when an expired mailbox becomes active again under plan rules.

mailbox.deleted Mailbox Deleted

Dispatched right before the webhook and its mailbox are deleted.

Intestazioni della richiesta & Verifica della firma HMAC

Ogni invio di webhook contiene intestazioni di sicurezza speciali. Utilizza l'intestazione X-TempMailg-Signature per verificare che le richieste in arrivo siano state effettivamente inviate da TempMailg e non siano state alterate.

Nome intestazione	Valore di esempio	Descrizione
`User-Agent`	TempMailg-Webhooks/1.0	Standard identifier for the webhook delivery worker.
`X-TempMailg-Event`	email.received	The type of event that triggered this delivery.
`X-TempMailg-Event-Id`	e7b1a2c3-4d5e-6f7a-8b9c-0d1e2f3a4b5c	Unique UUID assigned to this delivery attempt.
`X-TempMailg-Timestamp`	1725192000	Unix epoch timestamp indicating when the request was initiated.
`X-TempMailg-Signature`	sha256=d7a8fbb307d7809469ca933b02d82941...	HMAC-SHA256 signature calculated from {timestamp}.{raw_body} using your secret.
`X-TempMailg-Test`	false	True when dispatched by the "Send Test Ping" feature in your dashboard.

Come funziona la verifica della firma

La firma viene calcolata utilizzando HMAC con SHA256 sulla stringa: hash_hmac('sha256', "${X-TempMailg-Timestamp}.${raw_request_body}", your_webhook_secret)

Utilizza sempre i byte grezzi del corpo della richiesta dell'endpoint per verificare le firme prima di analizzare il JSON.

Esempio di Payload di Evento (email.received)

Inviato come application/json nel corpo della richiesta HTTP POST.

{
    "id": "e7b1a2c3-4d5e-6f7a-8b9c-0d1e2f3a4b5c",
    "version": "1.0",
    "event": "email.received",
    "occurred_at": "2026-10-29T06:07:17+00:00",
    "test": false,
    "mailbox": {
        "id": 1024,
        "email": "developer@v1.tempmailg.com"
    },
    "data": {
        "message_id": "7a8b9c0d1e2f",
        "subject": "Your Verification Code: 948201",
        "from": "auth@service.com",
        "to": "developer@v1.tempmailg.com",
        "date": "2026-10-29T06:07:17+00:00",
        "attachments_count": 0,
        "text_preview": "Hello, your one-time verification code is 948201. It will expire in 10 minutes.",
        "email_url": "https://tempmailg.com/mailbox/1024?message=7a8b9c0d1e2f",
        "inbox_url": "https://tempmailg.com/mailbox/1024"
    }
}

Esempi di implementazione del ricevitore

Seleziona la tua lingua per vedere come ricevere webhook e verificare le firme HMAC in modo sicuro.

const express = require('express');
const crypto = require('crypto');

const app = express();
const WEBHOOK_SECRET = 'your_webhook_signing_secret';

// Capture raw body buffer for HMAC-SHA256 signature verification
app.use(express.json({
  verify: (req, res, buf) => {
    req.rawBody = buf.toString('utf8');
  }
}));

app.post('/webhook', (req, res) => {
  const timestamp = req.headers['x-tempmailg-timestamp'];
  const signatureHeader = req.headers['x-tempmailg-signature'] || '';

  // Calculate HMAC-SHA256 signature
  const expectedSignature = 'sha256=' + crypto
    .createHmac('sha256', WEBHOOK_SECRET)
    .update(`${timestamp}.${req.rawBody}`)
    .digest('hex');

  // Verify signature
  if (signatureHeader !== expectedSignature) {
    return res.status(401).json({ error: 'Invalid webhook signature' });
  }

  const { event, mailbox, data } = req.body;
  console.log(`[Event: ${event}] Mailbox: ${mailbox.email}`);

  if (event === 'email.received') {
    console.log(`From: ${data.from}`);
    console.log(`Subject: ${data.subject}`);
    console.log(`Preview: ${data.text_preview}`);
  }

  // Acknowledge receipt with HTTP 200
  res.status(200).json({ received: true });
});

app.listen(3000, () => console.log('Webhook receiver running on port 3000'));

from flask import Flask, request, jsonify
import hmac
import hashlib

app = Flask(__name__)
WEBHOOK_SECRET = b"your_webhook_signing_secret"

@app.route("/webhook", methods=["POST"])
def handle_webhook():
    timestamp = request.headers.get("X-TempMailg-Timestamp", "")
    signature_header = request.headers.get("X-TempMailg-Signature", "")

    # Calculate expected HMAC-SHA256 signature
    raw_body = request.get_data()
    signed_payload = f"{timestamp}.".encode("utf-8") + raw_body
    expected_signature = "sha256=" + hmac.new(
        WEBHOOK_SECRET, signed_payload, hashlib.sha256
    ).hexdigest()

    # Verify signature securely
    if not hmac.compare_digest(signature_header, expected_signature):
        return jsonify({"error": "Invalid signature"}), 401

    payload = request.get_json()
    event = payload.get("event")
    mailbox = payload.get("mailbox", {}).get("email")
    data = payload.get("data", {})

    print(f"[{event}] Mailbox: {mailbox}")
    if event == "email.received":
        print(f"From: {data.get('from')}")
        print(f"Subject: {data.get('subject')}")
        print(f"Preview: {data.get('text_preview')}")

    # Return 200 OK to acknowledge receipt
    return jsonify({"received": True}), 200

if __name__ == "__main__":
    app.run(port=5000)

<?php

$secret = 'your_webhook_signing_secret';
$rawBody = file_get_contents('php://input');
$timestamp = $_SERVER['HTTP_X_TEMPMAILG_TIMESTAMP'] ?? '';
$receivedSignature = $_SERVER['HTTP_X_TEMPMAILG_SIGNATURE'] ?? '';

// Calculate HMAC-SHA256 signature
$expectedSignature = 'sha256=' . hash_hmac('sha256', $timestamp . '.' . $rawBody, $secret);

// Verify signature
if (!hash_equals($expectedSignature, $receivedSignature)) {
    http_response_code(401);
    echo json_encode(['error' => 'Invalid signature']);
    exit;
}

$payload = json_decode($rawBody, true);
$event = $payload['event'] ?? '';
$mailbox = $payload['mailbox']['email'] ?? '';
$data = $payload['data'] ?? [];

if ($event === 'email.received') {
    $sender = $data['from'] ?? '';
    $subject = $data['subject'] ?? '';
    $preview = $data['text_preview'] ?? '';
    // Process new incoming email...
}

// Acknowledge receipt
http_response_code(200);
echo json_encode(['received' => true]);

Piattaforme supportate e integrazioni di automazione

I webhook di TempMailg funzionano subito con endpoint HTTPS standard e le principali piattaforme no-code/automazione:

Custom HTTP POST / JSON Discord Slack Mattermost Microsoft Teams Google Chat Zapier Make.com Pipedream n8n much more

Errori comuni e risoluzione dei problemi

Questi sono i codici di risposta più comuni che potresti vedere durante l'integrazione dell'API dell'utente.

Risposta in testo semplice invece di JSON Una risposta come "Cannot GET /" non è una risposta API Utente riuscita, anche se il suo stato è 200. Controlla l'URL completo della richiesta e mantieni il percorso API mostrato nell'URL di Base.

401 Unauthorized

Token Bearer non valido o mancante.

403 Forbidden

L'accesso API dell'utente è disabilitato per il piano utente corrente.

404 Not Found

La risorsa non è stata trovata sull'host consentito o non appartiene all'utente.

410 Gone / Expired

La casella di posta è scaduta o inattiva.

422 Validation Error

La convalida non è riuscita o la casella di posta/ dominio richiesto non è consentito.

429 Rate Limited / Quota Exhausted

A request limit, disabled plan, exhausted quota, or cooldown prevented the operation. Check the reason and available budget headers. Retry-After is optional.

503 API Protection Temporarily Unavailable

Protection storage or coordination could not be verified. Retry after the indicated delay. This response is not a failed payment.

Lista di controllo rapida

401 Unauthorized - Il token Bearer è mancante, errato, revocato o copiato in modo errato.
403 Forbidden - Il piano attuale non ha attualmente il diritto di accesso all'API dell'utente.
404 Not Found - Risorsa non trovata o parametro invalido
410 Gone / Expired - La casella di posta è scaduta o non è più attiva.
429 Rate Limited - Limite di credito mensile raggiunto — acquistare crediti o attendere il reset

Passo successivo consigliato

Se sei connesso, apri prima la gestione dell'API e conferma lo stato del tuo chiave, quota, piano di accesso e l'esatto URL di base dell'API utente prima di eseguire il debug della tua app esterna.

Accedi per Configurare Chiave API