Hurtig oppsett-sjekkliste

Åpne dashbord-siden API-håndtering og opprette din personlige API-nøkkel.
Kopier den eksakte Bruker-API-basen-URL som vist der, for eksempel https://v1.tempmailg.com/api.
Send hver forespørsel til den API-vert med Authorization: Bearer YOUR_USER_API_KEY og Accept: application/json.
Spor din månedlige forespørselskvote fra samme dashbordside og fra kvote‑overskrifter når de er tilgjengelige i bruker‑API‑svar. Kun vellykkede 2xx‑forespørsler teller mot kvoten.

Hvis API-en returnerer 404 Sørg for at du ringer dedikert bruker-API-vert eksakt som vist på din API-håndteringsside.

API-nøkkeltilgang

Logg inn for å opprette din personlige API-nøkkel og vis live kvote-detaljer.

Logg Inn Registrer deg

Autentiseringsflyt

Generer din personlige API-nøkkel fra dashboard-API-håndteringssiden.
Send nøkkelen som en Bearer-token i hver forespørsel.
Bruk den dedikerte bruker-API-basen URL som vist på din API-håndteringsside.
Generer nøkkelen på nytt når du ønsker å gjøre den gamle ugyldig og starte å bruke en ny nøkkel med en gang.

Nøkkelvisibilitet Din bruker-API-nøkkel forblir synlig inne i din API-håndteringsside til du generer eller tilbaker den.

Obligatoriske header

Authorization: Bearer YOUR_USER_API_KEY
Accept: application/json

Ratebegrensning & Kvote Overskrifter

Rate‑limit‑overskrifter beskriver det angitte forespørselsbudsjettet. Kvote‑overskrifter er inkludert når kvoteinformasjon er tilgjengelig; avvisninger på minutt‑grense beregner ikke din fullstendige månedlige kvote.

X-RateLimit-Limit: 60
X-RateLimit-Remaining: 45
X-RateLimit-Reset: 1729520000
X-Quota-Limit: 50000
X-Quota-Remaining: 48210
X-Quota-Used: 1790
X-Quota-Reset: 2026-11-01T00:00:00+00:00
X-RateLimit-Scope: account
Retry-After: 42 (when a timed retry is available)

X-RateLimit-Limit — Maksimalt antall forespørsler per minutt (RPM) for planen din.
X-RateLimit-Remaining — RPM-forespørsler gjenstår i det nåværende minuttvinduet.
X-RateLimit-Reset — Unix-tidsstempel når det nåværende minutts takgrensevinduet tilbakestilles.
X-Quota-Limit — Total månedlig og kjøpt kredittkapasitet for kontoen din.
X-Quota-Remaining — Gjenværende tilgjengelige API-forespørsler i inneværende måned.
X-Quota-Used — Totalt antall API-forespørsler forbrukt i den nåværende faktureringsperioden.
X-Quota-Reset — ISO-8601 tidsstempel når din månedlige kvote tilbakestilles.
X-RateLimit-Scope — Budsjettet beskrevet av overskriftene: account, ip, status_endpoint, eller mailbox.
X-Mailbox-RateLimit-* — Separat budsjett for opprettelse/oppdatering av postboks. Vellykkede postboksrespons beholder konto RPM i X-RateLimit-*; en avvisning kun for postboks bruker postboksens omfang og sitt eget gjenforsøkvindu.
Retry-After — Sekunder til et tidsbestemt gjenforsøk er passende. En deaktivert plan eller oppbrukt kvote kan kreve en kontobytt i stedet, så denne overskriften er ikke alltid til stede.
503 protection_unavailable — API-beskyttelseslagring eller koordinering er midlertidig utilgjengelig. Prøv igjen senere; dette er ikke en betalingsfeil eller en kredittdebet.

Mailbox Management

Fetch allowed domains, create, update lifetimes, switch, and delete temporary email addresses.

GET https://v1.tempmailg.com/api/domains?type={type}

List Allowed Domains

List available domains for creating temporary emails. Filter by type to see only free, premium, or custom domains supported by your subscription plan.

Parametere 1

Parameter	Sted	Type	Status	Beskrivelse
`type`	query	string	valgfri	Domain tier filter. Allowed values: free, basic, pro, premium, custom, ultimate, all Standard: `free`

Få tillatte domener

const response = await fetch('https://v1.tempmailg.com/api/domains?type=free', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/domains?type=free', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/domains?type=free');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/domains?type=free' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "requested_type": "free",
        "plan": "pro",
        "plan_name": "Pro Plan",
        "allowed_types": [
            "free",
            "basic",
            "pro",
            "premium",
            "custom",
            "ultimate",
            "all"
        ],
        "domains": [
            {
                "domain": "example.com",
                "type": "Free",
                "custom": false
            }
        ]
    }
}

POST https://v1.tempmailg.com/api/emails

Create Temporary Mailbox

Create a new temporary email address. By default, a random email address is generated. You can customize the email username, domain, or domain type by providing the appropriate parameters in the JSON request body.

Parametere 4

Parameter	Sted	Type	Status	Beskrivelse
`username`	body	string	valgfri	Custom mailbox username prefix (subject to plan custom username permissions). Standard: `Randomly generated`
`domain`	body	string	valgfri	One of the allowed domains returned by GET /domains. Standard: `Default allowed domain`
`lifetime`	body	string	valgfri	Mailbox duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited (also accepts mailbox_lifetime or email_lifetime). Standard: `Plan default lifetime`
`provider`	body	string	valgfri	Mailbox provider: standard, gmail_alias, or outlook_alias. Standard: `standard`

Optional body parameters: username (custom username if allowed by plan), domain (allowed domain, e.g. example.com), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited), provider (standard, gmail_alias, outlook_alias). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create mailbox

const response = await fetch('https://v1.tempmailg.com/api/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2301,
        "email": "customuser@example.com",
        "domain": "example.com",
        "provider": "standard",
        "expire_at": "2026-10-30T06:08:26+00:00",
        "expires_in_seconds": 86400,
        "created_at": "2026-10-29T06:08:26+00:00",
        "email_token": "encrypted-email-token"
    }
}

POST https://v1.tempmailg.com/api/emails/{email}/{username}/{domain}

Update / Switch Mailbox

Update or switch an existing owned mailbox to a new username and allowed domain. This operation applies only to mailboxes owned by the authenticated user.

Parametere 4

Parameter	Sted	Type	Status	Beskrivelse
`email`	path	string	påkrevd	Current full email address of the owned mailbox to switch.
`username`	path	string	påkrevd	New desired username prefix.
`domain`	path	string	påkrevd	New allowed domain name.
`lifetime`	body	string	valgfri	Optional new mailbox lifetime duration. Standard: `Current remaining / plan default`

Bruk en eksisterende eid postkasse-e-post i {email}. Optional body parameter: lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Oppdater eid postkasse

const response = await fetch('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/emails/current@example.com/demo123/example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2302,
        "email": "demo123@example.com",
        "domain": "example.com",
        "expire_at": "2026-10-29T06:18:26+00:00",
        "expires_in_seconds": 600,
        "created_at": "2026-10-29T06:08:26+00:00",
        "email_token": "encrypted-email-token"
    }
}

DELETE https://v1.tempmailg.com/api/emails/{email}

Delete Mailbox

Delete a temporary email address. The email address is immediately marked as expired and soft-deleted, along with all its associated messages.

Parametere 1

Parameter	Sted	Type	Status	Beskrivelse
`email`	path	string	påkrevd	Full email address of the owned mailbox to delete.

Slett eid postkasse

const response = await fetch('https://v1.tempmailg.com/api/emails/demo123@example.com', {
  method: 'DELETE',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.delete('https://v1.tempmailg.com/api/emails/demo123@example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/emails/demo123@example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'DELETE',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request DELETE \
  --url 'https://v1.tempmailg.com/api/emails/demo123@example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "message": "Email has been successfully deleted."
}

Gmail og Outlook-aliaser

Generate high-reputation Gmail and Outlook/Hotmail alias mailboxes.

POST https://v1.tempmailg.com/api/gmail-alias/emails

Create Gmail Alias

Create a new Gmail alias temporary mailbox owned by the authenticated user.

Parametere 4

Parameter	Sted	Type	Status	Beskrivelse
`mode`	body	string	valgfri	Generation mode: auto, dot, plus, or plus_word. Standard: `auto`
`username`	body	string	valgfri	Custom alias username prefix. Standard: `Auto-generated`
`domain`	body	string	valgfri	Allowed domain: gmail.com or googlemail.com. Standard: `gmail.com`
`lifetime`	body	string	valgfri	Duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited. Standard: `Plan default lifetime`

Requires the Gmail Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Optional parameters: mode (auto, dot, plus, plus_word), username (custom alias username), domain (e.g. gmail.com, googlemail.com), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create Gmail alias mailbox

const response = await fetch('https://v1.tempmailg.com/api/gmail-alias/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/gmail-alias/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/gmail-alias/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/gmail-alias/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2305,
        "email": "myname.alias123@gmail.com",
        "domain": "gmail.com",
        "provider": "gmail_alias",
        "expire_at": "2026-10-29T07:08:27+00:00",
        "expires_in_seconds": 3600,
        "created_at": "2026-10-29T06:08:27+00:00",
        "email_token": "encrypted-email-token"
    }
}

GET https://v1.tempmailg.com/api/outlook-alias/domains

Outlook Alias Domains

Fetch active Outlook / Hotmail alias domains available for mailbox generation.

Requires the Outlook Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Indicates whether specific domain selection is unlocked on your plan.

Get Outlook alias domains

const response = await fetch('https://v1.tempmailg.com/api/outlook-alias/domains', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/outlook-alias/domains', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/outlook-alias/domains');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/outlook-alias/domains' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "domains": [
            {
                "domain": "outlook.com",
                "type": "Outlook/Hotmail",
                "selectable": true,
                "locked": false,
                "disabled_reason": null
            },
            {
                "domain": "hotmail.com",
                "type": "Outlook/Hotmail",
                "selectable": true,
                "locked": false,
                "disabled_reason": null
            }
        ]
    }
}

POST https://v1.tempmailg.com/api/outlook-alias/emails

Create Outlook Alias

Create a new Outlook / Hotmail alias temporary mailbox owned by the authenticated user.

Parametere 3

Parameter	Sted	Type	Status	Beskrivelse
`domain`	body	string	valgfri	Target Outlook domain, e.g. outlook.com or hotmail.com. Standard: `First available`
`username`	body	string	valgfri	Custom alias prefix if allowed by subscription. Standard: `Auto-generated`
`lifetime`	body	string	valgfri	Duration: 10m, 1h, 2h, 1d, 1w, 1m, or unlimited. Standard: `Plan default lifetime`

Requires the Outlook Alias API permission to be enabled on your subscription plan or unlocked via an API Credit package. Optional parameters: domain (e.g. outlook.com, hotmail.com), username (custom alias username), lifetime (allowed values: 10m, 1h, 2h, 1d, 1w, 1m, unlimited). Omit lifetime, or leave it empty, to use the Default Email Lifetime configured for your current monthly/yearly plan. Send a permitted lifetime such as 1h to override that default. Unlimited is used only when configured as the plan default or explicitly requested and permitted. The body parameters mailbox_lifetime and email_lifetime are also accepted; the first non-empty value wins in this order: lifetime, mailbox_lifetime, email_lifetime. Invalid or disallowed values return HTTP 422 instead of silently selecting a default.

Create Outlook alias mailbox

const response = await fetch('https://v1.tempmailg.com/api/outlook-alias/emails', {
  method: 'POST',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.post('https://v1.tempmailg.com/api/outlook-alias/emails', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/outlook-alias/emails');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'POST',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request POST \
  --url 'https://v1.tempmailg.com/api/outlook-alias/emails' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "id": 2306,
        "email": "fastuser_alias45@outlook.com",
        "domain": "outlook.com",
        "provider": "outlook_alias",
        "expire_at": "2026-10-29T07:08:28+00:00",
        "expires_in_seconds": 3600,
        "created_at": "2026-10-29T06:08:28+00:00",
        "email_token": "encrypted-email-token"
    }
}

Messages & Attachments

Fetch incoming inboxes, read full HTML/text messages, and stream attachments.

GET https://v1.tempmailg.com/api/messages?email={email}

List Mailbox Messages

Retrieve all messages from a temporary email inbox. Returns message details, including message ID, sender, subject, received date, read status, and email preview.

Parametere 1

Parameter	Sted	Type	Status	Beskrivelse
`email`	query	string	påkrevd	Full email address of the owned mailbox to read messages from.

E-post-spørringsparameteren må tilhøre den autentiserte brukerkontoen.

Les postkassemeldinger

const response = await fetch('https://v1.tempmailg.com/api/messages?email=demo123@example.com', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages?email=demo123@example.com', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages?email=demo123@example.com');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages?email=demo123@example.com' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "mailbox": "randombox@example.com",
    "messages": [
        {
            "is_seen": false,
            "subject": "Welcome to Temp Mail",
            "from": "Example Sender",
            "from_email": "hello@example.org",
            "to": "randombox@example.com",
            "receivedAt": "2026-10-29 06:08:28",
            "id": "ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1",
            "html": true,
            "content": "<p>Hello from the inbox.</p>",
            "attachments": [
                {
                    "name": "file.txt",
                    "extension": "txt",
                    "size": 91,
                    "url": "https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt"
                }
            ]
        }
    ]
}

GET https://v1.tempmailg.com/api/messages/{messageId}

Get Single Message

Retrieve a specific email message by its ID (`hash_id`). Returns the full message content, including the HTML body and attachments.

Parametere 1

Parameter	Sted	Type	Status	Beskrivelse
`messageId`	path	string	påkrevd	Unique message ID returned in the message list.

Les en melding

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "data": {
        "is_seen": true,
        "subject": "Welcome to Temp Mail",
        "from": "Example Sender",
        "from_email": "hello@example.org",
        "to": "randombox@example.com",
        "receivedAt": "2026-10-29 06:08:29",
        "id": "ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1",
        "html": true,
        "content": "<p>Hello from the inbox.</p>",
        "attachments": [
            {
                "name": "file.txt",
                "extension": "txt",
                "size": 91,
                "url": "https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt"
            }
        ]
    }
}

DELETE https://v1.tempmailg.com/api/messages/{messageId}

Slett melding

Slett en enkelt eid melding.

Parametere 1

Parameter	Sted	Type	Status	Beskrivelse
`messageId`	path	string	påkrevd	Unique message ID string to permanently delete.

Slett ett meldingspunkt

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', {
  method: 'DELETE',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.delete('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'DELETE',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request DELETE \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": true,
    "message": "Message was deleted successfully."
}

GET https://v1.tempmailg.com/api/messages/{messageId}/attachments/{filename}

Download Attachment

Last ned en vedlegg fra en eid melding.

Parametere 2

Parameter	Sted	Type	Status	Beskrivelse
`messageId`	path	string	påkrevd	ID of the message containing the file.
`filename`	path	string	påkrevd	Filename and extension of the attachment to download.

This endpoint downloads the file directly. Downloads are subject to the maximum attachment size (MB) limit configured for your plan; oversized files return HTTP 403.

Last ned en vedlegg

const response = await fetch('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const blob = await response.blob();
const downloadUrl = window.URL.createObjectURL(blob);
const link = document.createElement('a');
link.href = downloadUrl;
link.download = 'file.txt';
document.body.appendChild(link);
link.click();
link.remove();
window.URL.revokeObjectURL(downloadUrl);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt', headers=headers, stream=True, timeout=30)
response.raise_for_status()

with open('file.txt', 'wb') as handle:
    for chunk in response.iter_content(chunk_size=8192):
        if chunk:
            handle.write(chunk)

<?php

$fileHandle = fopen('file.txt', 'w');
$ch = curl_init('https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_FILE => $fileHandle,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

if (curl_exec($ch) === false) {
    fclose($fileHandle);
    throw new RuntimeException(curl_error($ch));
}

curl_close($ch);
fclose($fileHandle);

curl --request GET \
  --url 'https://v1.tempmailg.com/api/messages/ap94AWDg123ELQz07vrVB9dLXlbqZM5NGwYxOJKko8n6m1/attachments/file.txt' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY' \
  --output file.txt

Nedlastingsatferd Dette endepunktet returnerer den forespurte filen direkte i stedet for en JSON-tekst.

Rate Limits & Quotas

Monitor real-time request budgets, rate limits, and account quotas without consuming credits.

GET https://v1.tempmailg.com/api/rate-limit

Rate Limit & Quota

Check your current rate limit and quota status without consuming any API usage. This endpoint is quota-free and does not deduct monthly API credits (abuse protection limit: 60 requests/min).

X-RateLimit-* describes the indicated request budget; X-Quota-* describes monthly and purchased capacity when available. X-Mailbox-RateLimit-* reports the separate mailbox creation/update budget. A mailbox-only rejection uses mailbox scope and its own retry window. Minute-limit rejections may omit quota information. Retry-After is included only for a timed retry; disabled access may require an account change. In this successful status response, data.limit, data.remaining and data.reset describe the account minute budget, not spendable credits. The data.quota object describes monthly allowance, credit balances and usage. The existing data.monthly_limit, data.monthly_remaining and data.purchased_credits fields remain aliases of the corresponding quota fields. A successful status check does not authorize another API operation. Operations still require enabled access, available quota and admission through all applicable limits. The quota snapshot does not promise capacity already reserved by an in-progress request.

Check rate limit status

const response = await fetch('https://v1.tempmailg.com/api/rate-limit', {
  method: 'GET',
  headers: {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
  },
});

if (!response.ok) {
  throw new Error(`Request failed with status ${response.status}`);
}

const data = await response.json();
console.log(data);

import requests

headers = {
    'Authorization': 'Bearer YOUR_USER_API_KEY',
    'Accept': 'application/json',
}

response = requests.get('https://v1.tempmailg.com/api/rate-limit', headers=headers, timeout=30)
response.raise_for_status()

print(response.json())

<?php

$ch = curl_init('https://v1.tempmailg.com/api/rate-limit');

curl_setopt_array($ch, [
    CURLOPT_CUSTOMREQUEST => 'GET',
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_HTTPHEADER => [
        'Authorization: Bearer YOUR_USER_API_KEY',
        'Accept: application/json',
    ],
]);

$response = curl_exec($ch);

if ($response === false) {
    throw new RuntimeException(curl_error($ch));
}

$statusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);

var_dump($statusCode, json_decode($response, true));

curl --request GET \
  --url 'https://v1.tempmailg.com/api/rate-limit' \
  --header 'Accept: application/json' \
  --header 'Authorization: Bearer YOUR_USER_API_KEY'

Eksempel på svar

200 OK • JSON

{
    "status": "success",
    "data": {
        "limit": 60,
        "remaining": 45,
        "reset": 32,
        "plan": "premium",
        "monthly_limit": 50000,
        "monthly_remaining": 48210,
        "purchased_credits": 5000,
        "quota": {
            "enabled": true,
            "user_api_status": true,
            "plan_name": "Premium Plan",
            "period": "2026-10",
            "base_limit": 50000,
            "extra_requests": 0,
            "monthly_limit": 50000,
            "monthly_remaining": 48210,
            "used": 1790,
            "purchased_credits": 5000,
            "bonus_credits": 1000,
            "direct_purchased_credits": 4000,
            "remaining": 53210,
            "unlimited": false,
            "usage_percent": 3,
            "reset_at": "2026-11-01T00:00:00+00:00"
        }
    }
}

Responsfelter

Felt	Type	Beskrivelse
`data.limit`	integer\|string	Account requests-per-minute limit. The string unlimited denotes an unlimited minute budget; this is independent of monthly quota.
`data.remaining`	integer\|string	Remaining account minute-budget slots, or the string unlimited. A positive value does not mean that API credits remain.
`data.reset`	integer	Seconds for the account minute window, not the monthly quota reset. Disabled or unlimited minute budgets can retain a nominal 60-second value; this does not promise access after waiting.
`data.plan`	string	Current plan tag. The readable plan name is provided separately in data.quota.plan_name.
`data.quota.enabled`	boolean	Whether global and plan/credit API access is enabled. This does not indicate remaining capacity or replace the user API switch.
`data.quota.user_api_status`	boolean	Whether the user has enabled their User API switch. Operations require this switch as well as enabled access and available capacity.
`data.quota.plan_name`	string	Readable name of the current plan.
`data.quota.period`	string	Calendar-month usage period in YYYY-MM format, using the application timezone; not necessarily the subscription billing period.
`data.quota.base_limit`	integer	Base monthly plan allowance. A value of -1 means unlimited.
`data.quota.extra_requests`	integer	Additional monthly allowance granted for the current usage period; separate from purchased credits.
`data.quota.monthly_limit`	integer	Base allowance plus current-period extra requests. A value of -1 means unlimited. Purchased credits are not included.
`data.quota.monthly_remaining`	integer\|null	Remaining finite monthly allowance, or null when monthly quota is unlimited. Null must not be interpreted as zero.
`data.quota.used`	integer	Successful, counted API operations in the current usage period, including operations using credits. Status checks do not increase this value.
`data.quota.purchased_credits`	integer	Current credit balance, including active plan bonus credits. Bonus credits must not be added to this balance a second time.
`data.quota.bonus_credits`	integer	Active plan-bonus portion of the credit balance; a breakdown of purchased_credits, not additional capacity.
`data.quota.direct_purchased_credits`	integer	Credit balance excluding the active plan-bonus portion. This value plus bonus_credits equals purchased_credits.
`data.quota.remaining`	integer\|null	Monthly remaining allowance plus the current credit balance, without double-counting bonuses. Null means unlimited monthly quota. Individual feature permissions and other request limits still apply.
`data.quota.unlimited`	boolean	Whether monthly quota is unlimited. This does not make the account minute budget or other feature limits unlimited.
`data.quota.usage_percent`	integer	Dashboard-compatible rounded percentage from 0 to 100: used divided by used plus remaining, multiplied by 100. It includes available credit capacity, so recharging can lower the percentage. It is 0 for unlimited quota or a zero-sized pool; it is not the minute rate-limit percentage or an access decision.
`data.quota.reset_at`	string	ISO-8601 timestamp with timezone offset for the next calendar-month quota reset. This is not the subscription expiry date, and the monthly reset does not refill purchased credits.

E-postkasse-webhooks (i sanntid)

I stedet for å gjenta poll av REST-API (GET /messages) for å sjekke etter innkommende e-post, konfigurerer du Webhooks for å sende nye meldinger til serveren din eller automatiseringsarbeidsflyt i sanntid.

Logg inn for å opprette webhook

Protokoll HTTPS POST

Innholdsformat JSON

Sikkerhet HMAC-SHA256

Tilgjengelighet Betalte planer

Støttede Webhook-hendelser

Hver webhook kan abonnere på en eller flere hendelsestypene. Din endepunkt mottar en hendelsesvarsel når en av disse utløsere aktiveres.

email.received Ny epost mottatt

Dispatched in real time whenever a new message reaches the selected mailbox.

mailbox.expired Mailbox Expired

Dispatched when the temporary mailbox expires and webhook processing is paused.

mailbox.reactivated Mailbox Reactivated

Dispatched when an expired mailbox becomes active again under plan rules.

mailbox.deleted Mailbox Deleted

Dispatched right before the webhook and its mailbox are deleted.

Spørringshoder & HMAC Signaturverifisering

Hvert webhook-levering inneholder spesielle sikkerhetshoder. Bruk X-TempMailg-Signature-hodet for å verifisere at innkommende forespørsler ble sendt på en ærlig måte av TempMailg og ikke har blitt endret.

Overskriftstittel	Eksempelverdi	Beskrivelse
`User-Agent`	TempMailg-Webhooks/1.0	Standard identifier for the webhook delivery worker.
`X-TempMailg-Event`	email.received	The type of event that triggered this delivery.
`X-TempMailg-Event-Id`	e7b1a2c3-4d5e-6f7a-8b9c-0d1e2f3a4b5c	Unique UUID assigned to this delivery attempt.
`X-TempMailg-Timestamp`	1725192000	Unix epoch timestamp indicating when the request was initiated.
`X-TempMailg-Signature`	sha256=d7a8fbb307d7809469ca933b02d82941...	HMAC-SHA256 signature calculated from {timestamp}.{raw_body} using your secret.
`X-TempMailg-Test`	false	True when dispatched by the "Send Test Ping" feature in your dashboard.

Hvordan signaturverifisering fungerer

Signaturen beregnes ved hjelp av HMAC med SHA256 over denne streng: hash_hmac('sha256', "${X-TempMailg-Timestamp}.${raw_request_body}", your_webhook_secret)

Bruk alltid dine rådata fra endpoint i forespørselen når du verifiserer signaturer før du parser JSON.

Eksempel på Hendelsesbetegnelse (email.received)

Levert som `application/json` i kroppen av HTTP POST-forespørselen.

{
    "id": "e7b1a2c3-4d5e-6f7a-8b9c-0d1e2f3a4b5c",
    "version": "1.0",
    "event": "email.received",
    "occurred_at": "2026-10-29T06:08:32+00:00",
    "test": false,
    "mailbox": {
        "id": 1024,
        "email": "developer@v1.tempmailg.com"
    },
    "data": {
        "message_id": "7a8b9c0d1e2f",
        "subject": "Your Verification Code: 948201",
        "from": "auth@service.com",
        "to": "developer@v1.tempmailg.com",
        "date": "2026-10-29T06:08:32+00:00",
        "attachments_count": 0,
        "text_preview": "Hello, your one-time verification code is 948201. It will expire in 10 minutes.",
        "email_url": "https://tempmailg.com/mailbox/1024?message=7a8b9c0d1e2f",
        "inbox_url": "https://tempmailg.com/mailbox/1024"
    }
}

Eksempler på mottakerimplementering

Velg språket ditt for å se hvordan du mottar webhooks og verifiserer HMAC‑signaturer på en sikker måte.

const express = require('express');
const crypto = require('crypto');

const app = express();
const WEBHOOK_SECRET = 'your_webhook_signing_secret';

// Capture raw body buffer for HMAC-SHA256 signature verification
app.use(express.json({
  verify: (req, res, buf) => {
    req.rawBody = buf.toString('utf8');
  }
}));

app.post('/webhook', (req, res) => {
  const timestamp = req.headers['x-tempmailg-timestamp'];
  const signatureHeader = req.headers['x-tempmailg-signature'] || '';

  // Calculate HMAC-SHA256 signature
  const expectedSignature = 'sha256=' + crypto
    .createHmac('sha256', WEBHOOK_SECRET)
    .update(`${timestamp}.${req.rawBody}`)
    .digest('hex');

  // Verify signature
  if (signatureHeader !== expectedSignature) {
    return res.status(401).json({ error: 'Invalid webhook signature' });
  }

  const { event, mailbox, data } = req.body;
  console.log(`[Event: ${event}] Mailbox: ${mailbox.email}`);

  if (event === 'email.received') {
    console.log(`From: ${data.from}`);
    console.log(`Subject: ${data.subject}`);
    console.log(`Preview: ${data.text_preview}`);
  }

  // Acknowledge receipt with HTTP 200
  res.status(200).json({ received: true });
});

app.listen(3000, () => console.log('Webhook receiver running on port 3000'));

from flask import Flask, request, jsonify
import hmac
import hashlib

app = Flask(__name__)
WEBHOOK_SECRET = b"your_webhook_signing_secret"

@app.route("/webhook", methods=["POST"])
def handle_webhook():
    timestamp = request.headers.get("X-TempMailg-Timestamp", "")
    signature_header = request.headers.get("X-TempMailg-Signature", "")

    # Calculate expected HMAC-SHA256 signature
    raw_body = request.get_data()
    signed_payload = f"{timestamp}.".encode("utf-8") + raw_body
    expected_signature = "sha256=" + hmac.new(
        WEBHOOK_SECRET, signed_payload, hashlib.sha256
    ).hexdigest()

    # Verify signature securely
    if not hmac.compare_digest(signature_header, expected_signature):
        return jsonify({"error": "Invalid signature"}), 401

    payload = request.get_json()
    event = payload.get("event")
    mailbox = payload.get("mailbox", {}).get("email")
    data = payload.get("data", {})

    print(f"[{event}] Mailbox: {mailbox}")
    if event == "email.received":
        print(f"From: {data.get('from')}")
        print(f"Subject: {data.get('subject')}")
        print(f"Preview: {data.get('text_preview')}")

    # Return 200 OK to acknowledge receipt
    return jsonify({"received": True}), 200

if __name__ == "__main__":
    app.run(port=5000)

<?php

$secret = 'your_webhook_signing_secret';
$rawBody = file_get_contents('php://input');
$timestamp = $_SERVER['HTTP_X_TEMPMAILG_TIMESTAMP'] ?? '';
$receivedSignature = $_SERVER['HTTP_X_TEMPMAILG_SIGNATURE'] ?? '';

// Calculate HMAC-SHA256 signature
$expectedSignature = 'sha256=' . hash_hmac('sha256', $timestamp . '.' . $rawBody, $secret);

// Verify signature
if (!hash_equals($expectedSignature, $receivedSignature)) {
    http_response_code(401);
    echo json_encode(['error' => 'Invalid signature']);
    exit;
}

$payload = json_decode($rawBody, true);
$event = $payload['event'] ?? '';
$mailbox = $payload['mailbox']['email'] ?? '';
$data = $payload['data'] ?? [];

if ($event === 'email.received') {
    $sender = $data['from'] ?? '';
    $subject = $data['subject'] ?? '';
    $preview = $data['text_preview'] ?? '';
    // Process new incoming email...
}

// Acknowledge receipt
http_response_code(200);
echo json_encode(['received' => true]);

Støttede plattformer og automatiseringsintegrasjoner

TempMailg Webhooks fungerer umiddelbart med standard HTTPS-endepunkter og ledende no-code/automatiseringsplattformer:

Custom HTTP POST / JSON Discord Slack Mattermost Microsoft Teams Google Chat Zapier Make.com Pipedream n8n much more

Vanlige feil og feilsøking

Dette er de vanligste responskodene du kan se mens du integrerer bruker-API-en.

Ren-tekst svar i stedet for JSON Et svar som "Cannot GET /" er ikke et vellykket User API-svar, selv om statusen er 200. Sjekk den komplette forespørsels-URLen og behold API-stien som vises i Base URL.

401 Unauthorized

Ugyldig eller manglende Bearer-token.

403 Forbidden

Bruker-API-tilgang er deaktivert for den nåværende brukerplanen.

404 Not Found

Ressursen ble ikke funnet på den tillatte verts- eller tilhører ikke brukeren.

410 Gone / Expired

Postboksen er utløpt eller inaktiv.

422 Validation Error

Validering feilet eller den forespurte postboksen/domenet er ikke tillatt.

429 Rate Limited / Quota Exhausted

A request limit, disabled plan, exhausted quota, or cooldown prevented the operation. Check the reason and available budget headers. Retry-After is optional.

503 API Protection Temporarily Unavailable

Protection storage or coordination could not be verified. Retry after the indicated delay. This response is not a failed payment.

Rask sjekklister

401 Unauthorized - Bearer-token mangler, er feil, er tilbaktatt eller er kopiert feil.
403 Forbidden - Gjeldende plan har ikke bruker-API-tilgang for øyeblikket.
404 Not Found - Ressurs ikke funnet eller ugyldig parameter
410 Gone / Expired - Postkassen er utløpt eller er ikke lenger aktiv.
429 Rate Limited - Månedlig kredittgrense nådd — kjøp mer kreditt eller vent på tilbakestilling

Anbefalt neste steg

Hvis du er logget inn, åpne API-håndtering først og bekreft din nøkkel, kvote, plan-tilgangsstatus og den eksakte bruker-API-basen-URL før du feilsøker din eksterne app.

Logg inn for å konfigurere API-nøkkel